Alcovisor Mark X with printer WPT-1R
The Alcovisor Mark X personal breathalyser uses Fuel Cell Technology (like the police) to measure the concentration of alcohol vapor on expired breath. The Alcovisor Mark X is extremely easy to operate, simply press the “On/Off” button on the side of the unit, attach a mouthpiece and blow. The reading will be displayed immediately to three digits after the decimal point. The unit offers both active and passive sampling. The main advantage of the Alcovisor Mark X is the use of the Fuel Cell. Fuel cell (Electrochemical sensors) as used in the Alcovisor Mark X, are used in Police Breathalysers due to their high accuracy and ability to retain their calibration over several thousand tests. The Alcovisor Mark X is the perfect instrument for personal, professional and industrial use.

Printer WPT-1R
The Alcovisor Mark X can be connected with a thermal printer WPT-1R via serial (RS-232) port to print out the test results when breath sample evidence is required.

Features

• Fuel Cell Technology
• High Accuracy & Precision
• High measurement range
• Results to three digits
• Large & Bright LCD Backlit
• Two modes of testing: Active and Passive
• Last result recall
• RS 232 printing capable
• Flow Check Technology
• Cumulative Test Counter
• Optional power supply
• Auto Power Off
• Low Battery Indicator

SPECIFICATIONS

Display	4 digit LCD with backlight, 35 x 20 mm
Detection Range	0.000 – 6.300 ‰ (g/l)
Resolution	0.001‰
Measurement units	‰ promile (g/l)
Mode	Active Mode / Passive mode
Sensor	High quality platinum electrochemical sensor
Basic Accuracy *	± 5% up to 2.00‰ ± 10% over 2.00‰
Memory	Last result recall
Warm up Time	< 3 seconds
Breath Sampling Time	4 seconds
Response Time	< 2 seconds
Recycle Time	< 5 seconds
Time gap between measuring	Not more than 1 min.
Alert System	Visual and audio alert system when BAC level exceed legal limit
Pump	Automatically actuated electronic pump system. No cocking required
Power type	4 x 1.5V alkaline batteries AA (R6) 12 Volt Car Adapter or AC 6Volt Adapter
Auto Power Off	After 2 minutes
Product weight	255 g (including batteries)
Product dimensions	150 x 70 x 35 mm
Operating temperature	-5° to 45°C
Storage temperature	-15° to 65°C
Storage humidity	Not grater than 95%
Certificates	Meets US DOT Evidential Accuracy, CE, ROHS
	WPT-1R printer, five mouthpieces, passive sample cup, two thermal paper rolls, connecting cable, car battery cable, protective pouch, carrying box, manual

* For more accurate test, it is recommended to recalibrate the unit after use of every 3-6 months or 300 tests, whichever comes earlier.
Specifications are subject to be changed without prior notice for functional improvements. 12 Volt Car Adapter

Currently viewing: Product Information Page - Breathalyser Alcovisor Mark X Printer